Overview:

      Port of Coronel is a port on the central Pacific coast of Chile.When the west 5 area standard is adopted.The maximum draft is 7.32 meters.The loading density of water is 1025.The tidal range is about 1.22 meters.Southwest wind prevails.Forced pilotage.If the berth is occupied or the ship fails to get the pilot, the ship shall anchor about 400 meters in front of the coal jetty, with the azimuth of 135 degrees and the water depth of 10.06 meters.Port service facilities: ship repair, small boats, medical treatment, fresh water, supplies and repatriation, no fuel, dry dock, traction, sewage.The nearest railway station is talcavano and Concepcion, and the nearest airport is talcavano and Concepcion.The coal port in the northeast of coronell Bay is in the old area of coronell port. The severe earthquake left two breakwaters on shore and destroyed the warehouse.The coal handling belt is 407 meters long. It was installed in 1942 and can still be used now.The breakwater has been reinforced as required.When the ship is moored, it should stop at a proper position because the loading boom on the wharf is fixed.At present, the maximum allowable draught is 7.32 meters, 400 tons of coal chips per hour, but it is allowed to change, and the average rate is not less than 350 tons per hour.The loading rate of coal is about 200 tons per hour.Most of them are filled with coal chips, and the coal blocks (50% of the output) are transported by train.The longest pier is 170 meters.There is no tugboat for mooring, but a moored motorboat can be used. Nine 220 meter long ropes are required.There is a water supply pipe on the wharf to provide fresh water.Some iron and brass castings can be made in Hong Kong, but only small water repairs are accepted.